600 CAMEL X
BAND SAW MACHINE FOR CUTTING OF TUBES
An unique construction of the band saw machine with three pulleys for leading of the blade. This conception enables high penetrability of the arm with the blade that is 10 grades sloped against the basement of the vice. Thanks to this the machine is suitable for a powerfull cutting of profiles H,L and fourside and round tubes.
Construction:
- Robust construction of the machine including vice part is designed so that it enables maximal use of bimetal blades.
- The arm is leaded in linear leadings. Working movement between the upper and down position are electronically regulated.
- There are three pulleys made from cust iron.
- Leading of blade is in hard-metal plates.
- Beams of of the blade quides are adjustable in all working extend.
- A cleaning brush is driven by an electroengine and ensures perfect cleaning of a blade.
- Drive by a worm gear box with a permanent oil filling, three phase engine with termoprotection, frequency converter for a setting of circumferential cutting speed 20-100m/min.
- The vice with a longstroke hydraulic cylinder. A press of a vice is hydraulically regulated.
- There is a 64 bit controll system that regulates an automatic feed of the arm toward the cut and ensures the communication with an external equipment of the machine.
Basic equipement of machine:
- blade,
- Light above the working place.
- set of tools,
- manual instructions.
| BOX-PCS | Box for cutted pieces with emulsion draining to the waterproof tank. |
|---|---|
| BOX-TRI | Box for the chips with emulsion draining to the waterproof tank |
| BOX-TAH | Tool for manipulation with BOX-PCS and BOX-TRI. |
| 600-VTH | Chain chip extraktor. |
| 600-SRZ | Vice behind the cut. Hydraulic clamping of the material behind the cut. |
| 600-NPH | Hydraulic tension of band. |
| MINI LUBE | wasteless lubricating systém, instead of emulsion cooling, specially for cutting profiles and non-ferrous metals, neccessary supply of pressed air 6 Atm |
| LASER LINE | Laser indicator of cut position. |
| 600-HP | Hydraulical upper vice mounted on the main vice. Hydraulic upper clamping tighten the material in vertical sense by the hydraulic cylinder connected with the cylinder of the main vice. |
| 600-HP-Z | Upper hydraulic clamping in output vice, thanks to hydraulic cylinder connected to hydraul. cylinder of the vice it is able to tighten the material in vertical direction |
| 500-RDT 1000/600 | input or output robust roller table with a gutter which prevents leakage of emulsion on the floor, width of cylinders 600 mm, lenght 1000 mm, capacity 1700kg/m |
| 500-RDT 2000/600 | input or output robust roller table with a gutter which prevents leakage of emulsion on the floor, width of cylinders 600 mm, lenght 2000 mm,capacity 3400 kg/2m |
| 500-RDM-2000/600 | Input or output robust roller table with driven rollers . Driving by electric engine, vormgearbox and invertor. By chain are driving cylinders. With 600mm, lenght 2000 mm, capacity 1000kg/1m. |
| 500-RDML 2000/600 | Input or output robust roller table with driven lers. Driving from RDM throught chain. With 600 mm, lenght 2000 mm, capacity 1700kg/1m, working with RDM 2000/6000. |
| 500-RDH | Independent movable cylinder, capacity 1000 kg. |
| 500 V | roller of roller table RDT pasted into gap. |
| OZP 1000 | mechanical fixed stop with ruler and scale line 1 meter long |
| OZP 2000 | Mechanical fixed stop with ruler and scale line 2 meters long. |
| OZP-D 1000 | Mechanical fixed stop with digital displey 1 meter long. |
| OZP-D 2000 | Mechanical fixed stop with digital displey 2 meter long. |
| OZS 2000 | electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops.Digital displey of setting lenght. |
| OZS-D 2000 | electromechanical stop working with RDM roller table. It has two contacts. When material switches on the first contact, RDM slows down, after switching on the second contact, RDM stops.Digital displey of setting lenght. |
| OZP-L | 2 meters long extension of OZP. |
| OZD-L | 2 meters long extension of OZD. |
| 500-RBR | side support fixed cylinder, height 500 mm, with its own frame, it is mounted to roller tables RDT. |
| 500-RBRS | side movable cylinder for preparation of bundles, adjustable, height 500 mm, it is mounted to RDT, with own frame. |
| 500-OZK | Console for supporting of the exceeding parts of the measuring arrangement. |
| 600 - NAV | Manual instructions – printed version. |
600_camel-x